XC9572XV7VQ44I
| Parameters | |
|---|---|
| Frequency (Max) | 125MHz |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Surface Mount | YES |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.62V |
| Temperature Grade | INDUSTRIAL |
| Number of I/O | 34 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
XC9572XV7VQ44I Overview
There are 72 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There are 34 I/Os on the board.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.This part is in the family [0].It is programmed with 44 pins.This device can also display [0].It is recommended that the supply voltage be kept at 2.5Vto maximize efficiency.In order to store data, FLASHis used.The pins are [0].In this case, the maximum supply voltage (Vsup) reaches 2.62V.In order to operate, the temperature should be higher than -40°C.A temperature lower than 85°Cis recommended for operation.There are 4logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be less than 0.
XC9572XV7VQ44I Features
34 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
XC9572XV7VQ44I Applications
There are a lot of Xilinx XC9572XV7VQ44I CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Digital designs
- Power Meter SMPS
- I/O expansion
- Address decoding
- DMA control
- D/T registers and latches
- Interface bridging
- LED Lighting systems
- Reset swapping