ULQ2003ADR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.294023mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| HTS Code | 8542.39.00.01 |
| Voltage - Rated DC | 50V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 500mA |
| Base Part Number | ULQ2003 |
| Pin Count | 16 |
| Output Voltage | 50V |
| Output Type | NPN |
| Number of Elements | 7 |
| Interface | Parallel |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1 μs |
| Input Type | Inverting |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Polarity/Channel Type | NPN |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 500mA |
| Ratio - Input:Output | 1:1 |
| JEDEC-95 Code | MS-012AC |
| Collector Emitter Breakdown Voltage | 50V |
| Voltage - Load | 50V Max |
| Collector Emitter Saturation Voltage | 1.2V |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ULQ2003ADR Overview
A Cut Tape (CT) is used to package it.It is included with the 16-SOIC (0.154, 3.90mm Width) package as well.The mounting type of the LED driver is Surface Mount.The switch type is Relay, Solenoid Driver.To ensure reliable operation, set the temperature to -40°C~85°C TA.To operate, it needs a supply voltage of Not Required.A maximum output voltage of NPN volts can be obtained with this LED driver.This object belongs to the ULQ2003 family.There are 16 terminations in it.During operation, the 16 pins are used.It is mounted in the way of Surface Mount.As a result, it has a total of 16 pins.There is an electrical component included in the Automotive, AEC-Q100 series.In this case, the output current is set to 500mA.The LED driver can also be used to produce LOGIC LEVEL COMPATIBLE.Total, there are 7 elements.It contains SWITCHING transistor applications.
ULQ2003ADR Features
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
ULQ2003ADR Applications
There are a lot of Texas Instruments ULQ2003ADR Power Switches ICs applications.
- PC Cards
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Gaming
- USB Ports/Hubs
- USB Power Distribution
- USB3.1 Power Delivery
- Hard Disk Drives
- Portable GPS
- Solid State Drivers