UCC2802QDREP
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
UCC2802QDREP Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TA in order to ensure its performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches Up to 1MHz , the process is complete.The voltage range of the supply can be set to 8.3V~12V (Vcc/Vdd).In total, there are 8 terminations.There are 8 pins on the ac/dc converter.Up to 8 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .If you select the UCC2802 family, you will be able to search for similar acdc converters.There are 1 outputs to be run.AC to DC converter is contained in Switching Regulator or Controllers .It has been set to 200mA for the output current.Its output voltage is1V .A high efficiency is achieved when operating at a frequency of 1MHz .This AC to DC converter should always be set to 10V .
UCC2802QDREP Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 200mA
UCC2802QDREP Applications
There are a lot of Texas Instruments UCC2802QDREP AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Cleaners
- Battery chargers for cordless
- Smartphones
- Standby power supplies for IR
- IoT Applications
- AC--DC Adapter
- Standby power supplies for VCR
- Power adapters for network devices
- AC/DC Adaptors/Chargers for PDAs