TPS68401C4YFFR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.25MHz |
| Base Part Number | TPS68401 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Max Output Current | 150mA |
| Operating Supply Voltage | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.7mA |
| Voltage - Output | 4.55V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.625mm |
| Length | 2.1615mm |
| Width | 1.598mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS68401C4YFFR Overview
20-UFBGA, DSBGA package saves space on the board. LED drivers use 3 outputs for their design.In this case, mounting method is Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.When the temperature is -30°C~85°C TA, it can work normally.Taking advantage of Backlight has considerable benefits.A frequency of 1.25MHz is used to operate it.For its operation, terminations with a value of 0 are used.To form its configuration, there are 20 pins.It is estimated that there are 3 segments.Part number TPS68401 represents this LED driver.The voltage of 5.5V is acceptable.It produces a voltage of 4.55V volts.In addition, it is equipped with a total of 20 pins.Further, its characteristics allow it to be classified as Display Drivers.As its minimal input voltage, it operates at 2.7V.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.Supply current cannot exceed 5.5V.It is necessary to power systems with a voltage of 3.6VLED drivers are able to deliver all the benefits of LEDs at their maximum output current of 150mA.
TPS68401C4YFFR Features
Available in the 20-UFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 1.25MHz
Supply voltage of 3.6V
Operating with the supply voltage of 3.6V
TPS68401C4YFFR Applications
There are a lot of Texas Instruments TPS68401C4YFFR LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Down lights
- Constant Voltage Power Source for portable equipment
- Panel lighting
- Flicker-free LED Lighting using R1580N
- Museum lighting
- A- lamps
- Amusement Machines