TPS2412PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 250mW |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2412 |
| Pin Count | 8 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 130ns |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2412PW Overview
The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. A Tube case is a good choice for packing the part. Surface Mount is the way the part is mounted. With 3V~16.5V as its voltage, it is given a temperature of 0°C. The minimum operating temperature of this component must not be -40°C~85°C. It fits perfectly with the component connected to N+1 Power Supplies, High Availability. N+1 ORing Controller represents the device category. In the case of FETs, N-Channel is recognized as the type. A 8 termination is available on the part. There are 8 pins on it. It is based on the TPS2412 component. In order to deliver its performance, it is powered by 5V. To run 260, we utilize the part's peak reflow temperature. A Power Management Circuits family part is involved in the project. As you can see, the part is equipped with 8 pins. Voltage supply (Vsup) for this part should not be less than 3V. This device is powered by 4.25mA, which is the supply current it uses to operate. Using the chip over 16.5V volts is allowed. It is possible to use this chip with an input voltage below 800mV volts. As a result, 290μA is the maximum output current that can be delivered to the component. This device has a maximum output voltage of 10.2V. During quiescent current, 1.2mA is used as the current source.
TPS2412PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412PW Applications
There are a lot of Texas Instruments TPS2412PW Ideal Diode controller applications.
- PDAs
- Electricity meters
- Motor drives
- Modems
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- Automotive battery protection
- Factory automation and control - PLC digital output modules
- Asset tracker
- ADAS domain controller