TPS2412D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 410mW |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2412 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 410mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 130ns |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2412D Overview
This item comes in a 8-SOIC (0.154, 3.90mm Width) case. Packing the part in Tube cases is ideal. Surface Mount is used to mount the part. A voltage of 3V~16.5V is applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It is fitting for the component connected in N+1 Power Supplies, High Availability. There is a N+1 ORing Controller category assigned to the device. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part comes with 8 terminations. 8 pins are used in the design of this product. It is based on the TPS2412 component. Powered by 5V, it is capable of delivering its performance to its customers. For 260, the peak reflow temperature of this part is used. There is a part of the Power Management Circuits family that is used in this part. This part contains 8 pins that are located on the surface. In order to operate this part properly, the minimum supply voltage (Vsup) should be at least 3V. In order to operate it, 4.25mA is used as the supply current. Using the chip over 16.5V volts is allowed. With an input voltage less than 800mV volts, it is possible to use the chip. The output current that can be delivered to the component is 290μA. During quiescent current, 1.2mA is used as the current source.
TPS2412D Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412D Applications
There are a lot of Texas Instruments TPS2412D Ideal Diode controller applications.
- Industrial transport
- Cell phones
- Electricity meters
- Building automation
- Power supply reverse polarity protection
- Active OR-ing of Redundant (N+1) Power Supplies
- Digital Cameras
- Automotive USB hubs
- Motor drives
- Camera ECU