TPS2115PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 386.84mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Max Supply Current | 55μA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2115PW Overview
It comes in 8-TSSOP (0.173, 4.40mm Width) case. It is suited to pack the part in Tube case. There are two ways in which this part is mounted. There is a voltage of 2.8V~5.5V applied to it. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. It fits perfectly with the component connected to Handheld/Mobile Devices. Device Source Selector Switch belongs to the Source Selector Switch category. The FET type can be recognized as N-Channel. 8 terminations are available in the part in order to meet your needs. Pins are positioned on 8 axes. Using TPS2115 as a basis, the part is constructed. Powered by 2.8V, it is capable of delivering its performance to its customers. The peak reflow temperature of this part is used to run 260 on it. As far as I know, the part belongs to the Power Management Circuits family. As you can see, the part is equipped with 8 pins. As part of the outputs, there is a 1 output. Chips can be used with input voltages of more than 5.5V volts. Input voltages less than 2.8V Volts are suitable for this chip, as long as the voltage input is not excessive. The part is capable of being delivered under 1.25A output current. The output current that can be delivered to the component is 1.25A. It can be operated at 5.5V supply voltage. Runs on 2 inputs. Its max output voltage amounts to 6V. It is important to keep the device resistance within the range of 84mOhm.
TPS2115PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115PW Applications
There are a lot of Texas Instruments TPS2115PW Ideal Diode controller applications.
- ADAS domain controller
- Active ORing for redundant power
- Digital Cameras
- Industrial motor drives
- Cell phones
- Alternator
- PDAs
- Electronic point of sale
- Reverse Polarity Protection
- USB HUBs