TPS2114APW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114APW Overview
The case is 8-TSSOP (0.173, 4.40mm Width)-shaped. Packing the part in Tube cases is ideal. There is a Surface Mount-axis mounted on the part. An electric current of 2.8V~5.5V is applied to it. A minimum operating temperature of -40°C~85°C must not be reached by this component. It is suitable for the component connected in Handheld/Mobile Devices. As a Source Selector Switch-type device, it is categorized. As far as FET types are concerned, N-Channel can be recognized. 8 terminations are available in the part. 8 pins are used in the design of this product. TPS2114 is the basis for the part. It is powered by 2.8V to deliver its perfomance. A maximum reflow temperature of this part is used if 260 is to be run. As far as I know, the part belongs to the Power Management Circuits family. In the part, you will find 8 pins. This device is powered by 55μA, which is the supply current it uses to operate. Under 0.09mA, the supply current (Isup) should flow. A 1 output is available on the board. An input voltage of more than 5.5V V can be used with the chip. It is possible to use this chip with an input voltage below 2.8V volts. This part is capable of being delivered with an output current of 750mA. The component can be delivered a current of 750mA as an output. The device can be operated with a voltage supply of 5.5V on the supply line. The part has 2 inputs to run.
TPS2114APW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2114APW Applications
There are a lot of Texas Instruments TPS2114APW Ideal Diode controller applications.
- Cell phones
- Electricity meters
- Industrial transport
- Modems
- Camera ECU
- USB HUBs
- Active OR-ing of Redundant (N+1) Power Supplies
- Asset tracker
- Alternator
- Factory automation and control - PLC digital output modules