TPS2113PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 386.84mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Max Supply Current | 1.5A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Drain to Source Resistance | 84mOhm |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113PW Overview
This item comes in a 8-TSSOP (0.173, 4.40mm Width) case. A Tube case is a good choice for packing the part. There is a Surface Mount-axis mounted on the part. There is a voltage of 2.8V~5.5V applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C. It is fitting for the component connected in Handheld/Mobile Devices. A Source Selector Switch device is categorized as such. In the case of FETs, N-Channel is recognized as the type. The part comes with 8 terminations. In this case, 8 pins have been used to design it. TPS2113 is the base of this part. The performance of this device is powered by 2.8V. To run 260, we utilize the part's peak reflow temperature. It is necessary to run the supply current at 55μA for the part. It is part of the Power Management Circuits family. In the part, you will find 8 pins. There are outputs that can be connected to 1. The chip can be used with an input voltage of more than 5.5V V. The chip can be used with an input voltage of less than 2.8V V. Parts can be delivered with 1.25A output current. The component can be delivered a current of 1.25A as an output. It is possible for this device to operate when the supply voltage is 5.5V. For this part to run, 2 inputs are required. This device's maximum output voltage is 6V. 84mOhm should be used for determining the device resistance.
TPS2113PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113PW Applications
There are a lot of Texas Instruments TPS2113PW Ideal Diode controller applications.
- Industrial motor drives
- Asset tracker
- USB HUBs
- Power supply reverse polarity protection
- Reverse Polarity Protection
- Digital Radios
- Active ORing for redundant power
- Alternator
- PCs
- Cell phones