TPS2112APWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2112 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - OFF | 3ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2112APWR Overview
The case comes in 8-TSSOP (0.173, 4.40mm Width) shape. In Tape & Reel (TR) cases, it is convenient to pack the part. The part is mounted in the way of Surface Mount. We give it a voltage of 2.8V~5.5V in order to test it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. Suitable for components connected in Handheld/Mobile Devices. There is a Source Selector Switch category assigned to the device. In this case, the FET type can be recognized as N-Channel. 8 terminations are available in the part in order to meet your needs. In this case, 8 pins have been used to design it. The part is based on TPS2112. In order to deliver its performance, it is powered by 2.8V. As part of the 260 process, the peak reflow temperature of this part is utilized. Using 55μA to run part supply current. This part is part of the Power Management Circuits family of parts. In this part, there are 8 pins. A supply current (Isup) should be conducted under the condition 0.09mA. There are 1 outputs. This chip can be used with an input voltage of more than 5.5V volts without any problems. With an input voltage less than 2.8V volts, it is possible to use the chip. It is possible to deliver the part with a 750mA output current. The component can be delivered a current of 750mA as an output. When supplied with a voltage of 5.5V, this device will function. A 2 input is required to run the part. This device has a maximum output voltage of 6V. Device resistance should remain within the range of 120mOhm throughout the duration of the test.
TPS2112APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112APWR Applications
There are a lot of Texas Instruments TPS2112APWR Ideal Diode controller applications.
- Digital Radios
- Modems
- Industrial motor drives
- Power Tools
- Power supply reverse polarity protection
- Active ORing for redundant power supplies
- Cell phones
- Head Unit
- MP3 Players
- Electricity meters