TPS2062D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2062 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 585.82mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Load Current | 1A |
| Rds On (Typ) | 70m Ω |
| Drain to Source Resistance | 70mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062D Overview
A Tube is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Status Flag features.It belongs to the family TPS2062.It contains 8 terminations.The operation is performed through the 8 pins.It is important to note that the LED driving board has 1 functions.The supply voltage of 3.3V is conducive to high efficiency.8 pins are connected to it in total.70mOhm is the resistance of the lighting driver.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.The maximum input voltage is 5.5V volts.Input voltage must be at least 2.7V volts.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.A maximum supply current of 0.09mA is available for operation.
TPS2062D Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2062D Applications
There are a lot of Texas Instruments TPS2062D Power Switches ICs applications.
- PC Cards
- Storage Drives
- Hot Swap
- Wireless Headsets
- USB Ports/Hubs
- Portable Music Players
- PC Card Hot Swap
- Portable/Handheld Devices
- HDD, SSD
- Portable GPS Device