TPS2051BDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2051 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2051BDR Overview
Tape & Reel (TR) is how it's packaged.It is included in the package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family TPS2051.There are 8 terminations in it.The 8 pins are used for the operation of the system.The LED driver has 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.Supply voltages of 3.3V allow for high efficiency.8 pins are connected to it in total.In this case, there is 70mOhm resistance in the LED driving board.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.To choose from, there are 1 channels.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2051BDR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2051BDR Applications
There are a lot of Texas Instruments TPS2051BDR Power Switches ICs applications.
- Handheld Devices
- USB Ports/Hubs
- Various applications equipped with buttons
- Set-Top Boxes
- USB Power Distribution
- PC Card Hot Swap
- Portable Video Game Players
- Low Voltage I/O System Power
- USB Power Distribution
- Portable Devices