TPS2042BD
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 586mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
TPS2042BD Overview
The package is in the form of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.I believe it belongs to the TPS2042 family.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It has 1 functions.This operation requires the maximum output current to be decreased to 500mA.The supply voltage of 3.3V is conducive to high efficiency.8 pins are equipped with it.In this LED driving board, there is 70mOhm resistance.In this case, the output current will be set to 500mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 2.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.It operates at a maximum supply current of 0.09mA.
TPS2042BD Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2042BD Applications
There are a lot of Texas Instruments TPS2042BD Power Switches ICs applications.
- Solid-State Drives
- Wearable Devices
- Notebook and Tablet Computers
- Mobile Communication Devices
- Solid State Drivers
- Gaming
- Portable Music Players
- Hot Swap
- PC Cards
- Wireless/Networking Cards