TLV3502AIDCNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3502 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 5mA |
| Output Current | 74mA |
| Max Supply Current | 5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 5mA |
| Response Time | 7.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 6.5mV |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 6.5mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 100dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Thickness | 1.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3502AIDCNRG4 Overview
In order to make transportation easier, it is packaged in SOT-23-8 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .This element consists of 2 elements in total.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3502 .There is 5mA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 5mA .An excess of current supply over 5mA could result in malfunction of the comparator.The device can be run with 3/5V power supplies.Often found in ADC circuits, this device is packed in TR .
TLV3502AIDCNRG4 Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3502AIDCNRG4 Applications
There are a lot of Texas Instruments TLV3502AIDCNRG4 linear comparators applications.
- Wireless Base Stations
- Window Comparators, Multivibrators
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Current and voltage sensing
- Laptop Computers
- Alarm and Monitoring Circuits
- General Purpose Low Voltage Applications
- Appliances
- Window Comparators