TLE4207GXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 13.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Min (Vsup) | 6V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 50mA |
| Output Configuration | Half Bridge (2) |
| Quiescent Current | 20μA |
| Output Current-Max | 1A |
| Halogen Free | Halogen Free |
| Collector Emitter Voltage (VCEO) | 18V |
| Max Collector Current | 800mA |
| Voltage - Load | 5V~18V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushed DC |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE4207GXUMA2 Overview
The package contains [0].Parts are packaged in 14-SOIC (0.154, 3.90mm Width)cases.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.5V~18V volts can be supplied by the device.A range of -40°C~150°C TJis available for operating temperature.The motor type can be classified as Brushed DC.The part supports 14terminations.You can apply voltage at 5V~18Vto the load.In order to get the best performance from this amplifier, it should be run at 13.2V.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.14pins are available on the device.1outputs are available.The motor type can be identified as Brushless DC (BLDC).Currently, there are 2 channels available.
TLE4207GXUMA2 Features
Applications : General Purpose
Load voltage across the chip 5V~18V
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
TLE4207GXUMA2 Applications
There are a lot of Infineon Technologies TLE4207GXUMA2 motor drivers applications.
- Daytime running lights (DRLs)
- High brightness LED lighting
- Automotive applications
- Dome
- Automotive exterior and interior lighting
- Hidden coves in high-end residential settings
- Camcorders
- Street lights
- Large format LED backlighting
- Emergency lighting