TLC5920DL
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 10MHz |
| Base Part Number | TLC5920 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Output Voltage | 900mV |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1.5W |
| Output Current | 640mA |
| Max Supply Current | 1.6mA |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| High Level Output Current | -30mA |
| Low Level Output Current | 640mA |
| fmax-Min | 10 MHz |
| Number of Segments | 128 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Linear |
| Additional Feature | COMMON-CATHODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
TLC5920DL Overview
In order to save board space, the 48-BSSOP (0.295, 7.50mm Width) package is used. In LED drivers, the outputs are all set to 16.It adopts the way of Surface Mount for mounting.In this case, the Linear emerges as highly efficient and reliable.The LED driver has the capability of operating at a temperature of -20°C~85°C TA.The system operates at a frequency of 10MHz.In this case, it uses 48 terminations.A configuration of this chip is made up of 48 pins.It is estimated that there are 128 segments.LED drivers can be found under the base part number TLC5920.It is acceptable to have a maximum voltage of 5.5V.The device has 48 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.This device requires a minimum voltage of 4.5V volts.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.In the case of supply current, there is a maximum value of 5.5V.If the maximum supply current is less than 1.6mA, the device is capable of providing high efficiency.A load can be supplied with 640mA current.Powering systems requires an internal voltage of 5V.The voltage at the output terminal is 900mV.This LED driver is also characterized by the number COMMON-CATHODE.
TLC5920DL Features
Available in the 48-BSSOP (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 10MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 900mV
COMMON-CATHODE
TLC5920DL Applications
There are a lot of Texas Instruments TLC5920DL LED Driver ICs applications.
- General lighting
- Panel lighting
- Dimmable LED for vehicle interiors
- Down lights
- Sports Facility Lighting
- Gallery lighting
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices