TL3116CPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 525mW |
| Nominal Supply Current | 12.7mA |
| Power Dissipation | 525mW |
| Max Supply Current | 12.7mA |
| Current - Output | 20mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 14.7mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1.1μA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 2.5V |
| Max Input Current | 1.1μA |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TL3116CPWG4 Overview
In order to facilitate transportation, it is packaged in TSSOP .A comparator with an output type of TTL is being used.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.The device is equipped with 8 pins.Electronic comparator has 8 pins.As a result, this comparator displays a quiescent current of 14.7mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 12.7mA .An excess of current supply over 12.7mA could result in malfunction of the comparator.You are allowed to input a maximum current of 1.1μA into the device.Keeping the temperature below 70°C is not recommended.A temperature lower than 0°C is unsuitable for the device.The comparator has a maximum supply voltage of 10V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 5V .1 channels cooperate together to maintain the output quality.A 20mA output current is specified for this device.
TL3116CPWG4 Features
TTL output capability
General Purpose IC
Quiescent Current: 14.7mA
TL3116CPWG4 Applications
There are a lot of Texas Instruments TL3116CPWG4 linear comparators applications.
- Hand-Held Electronics
- Handheld Instruments
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Appliances
- Limit Comparators
- Self-diagnostics
- Analog front end
- Lithium ion battery monitoring
- Laptop Computers