TIBPAL20R6-25CNT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Base Part Number | TIBPAL20R6 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 2 |
| Nominal Supply Current | 105mA |
| Max Supply Current | 105mA |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 25 ns |
| Access Time | 25 ns |
| Output Function | MIXED |
| Number of Dedicated Inputs | 12 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 5.08mm |
| Length | 31.64mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL20R6-25CNT Overview
The PLD stock is mounted using Type Through Hole.It has a type of PLD Programmable logic device? of PAL programmable.As far as performance-cost ratio is concerned, IMPACT-X? PAL? Series is the best value on the market.The 24-DIP (0.300, 7.62mm)'s package makes it a popular choice for electronics.Programmable array logic's Packaging is made from Tube-materials.There is a TIBPAL20R6-shaped section on the PLD stock that is Programmable logic array's biggest part.Through Hole is mounted in the way of the PLD.There is no change to the pin number for the Complex Programmable logic device, which remains 24.It can still function precisely at 50MHz?frequency.At the present time, 75°C is the maximum working temperature.The temperature should be higher than 0°C when Programmable logic devices are operating.4.75V volts is the only voltage it can work with.There is 5.25V supply voltage that can be used with Programmable logic controller.There are programmable 2 I/Os on the board.Programmable logic devices are always powered by 5V.The board is equipped with 12-dedicated inputs.The termination is set to 24.In this case, the Programmable Logic Devices subcategory can be applied.Supplies for the Programmable logic device are 5V.There are 64 terms in the product.Several 8 outputs can be found.There is a requirement for 5V voltage in order to make it work.It has a sum of 24 pins.The maximum supply temperature is 105mA.The list of additional features includes REGISTER PRELOAD; POWER-UP RESET, for example.
TIBPAL20R6-25CNT Features
Mounting type of Through Hole
Maximum temperature of 75°C
2 I/Os
TIBPAL20R6-25CNT Applications
There are a lot of Texas Instruments TIBPAL20R6-25CNT PLDs (Programmable Logic Device) applications.
- High-end communication equipment
- Power-limited applications
- Industrial
- Programmable Logic Devices
- Microcomputer systems
- Various types of power-limited applications
- Battery operated devices
- high-performance microcomputer systems
- Highly complex logic
- Software