TIBPAL16L8-25CFN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | TIBPAL16L8 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 75mA |
| Number of I/O | 6 |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Access Time | 25 ns |
| Screening Level | MIL-STD-883 |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL16L8-25CFN Overview
The PLD stock is mounted using Type Surface Mount.PAL is the programmable type of PLD Programmable logic device?.As a result of Programmable logic array's performance-cost ratio, IMPACT-X? PAL? Series is one of the best values available today.20-LCC (J-Lead) has a package, so Programmable logic devices are widely used in electronics.Materials from Tube are used to make the packaging.There is a TIBPAL16L8-shaped section on the PLD stock that is Programmable logic array's biggest part.The PLD is mounted in the way of Surface Mount.Complex Programmable logic device 20 has the same pin number as before.At 30MHz frequency, Programmable logic devices are still capable of performing precisely.Current maximum working temperatures are 75°C.The temperature should be higher than 0°C when Programmable logic devices are operating.There is only a supply voltage of 4.75V volts that it can work with.Only a 5.25V supply voltage can be used.There are 6 programmable I/Os on this PLD.Power is always provided by 5V.Inputs are dedicated to 10 on this board.There is a 20 termination programmed into it.There is a Programmable Logic Devices subcategory for it.The Programmable logic device is supplied by 5V.Product terms are counted by 64.A number of 2 outputs are available.There is a requirement for 5V voltage in order to make it work.A board with 20 pins has specific purposes.If the supply temperature is not higher than 100mA, it will not work.Since it can operate with a variety of supply voltages of 75mA, Programmable logic devices are an excellent choice for many applications.
TIBPAL16L8-25CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
6 I/Os
TIBPAL16L8-25CFN Applications
There are a lot of Texas Instruments TIBPAL16L8-25CFN PLDs (Programmable Logic Device) applications.
- High-end communication equipment
- Electrically Devices
- Low power applications
- High performance applications
- high-performance microcomputer systems
- Software
- Battery operated devices
- Various types of power-limited applications
- Programmable Logic Devices
- High-speed Devices