STP16CPC05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11.7mA |
| Output Current | 100mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPC05XTTR Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers use 16 outputs for their design.It is mounted using Surface Mount.It emerges as a Linear, which is efficient and reliable.The led light driver is capable of working normally at -40°C~125°C TA.It operates on the basis of the frequency of 30MHz.The terminations 24 are designed for its operation.This configuration is built upon 24 pins.It is possible that failures will occur if the voltage supply is below 3V.There are 16 segments in it.The mount is on its way to Surface Mount.This LED driver has the part number STP16C.As a maximum value, 5.5V is acceptable.This device has an output voltage of 20V volts.In this device, there are 24 pins.Additionally, it is categorized into Display Drivers according to its characteristics.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.The current that can be supplied to the load is 100mA.
STP16CPC05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPC05XTTR Applications
There are a lot of STMicroelectronics STP16CPC05XTTR LED Driver ICs applications.
- OLED power supply for portable equipment
- Stage Lighting and Signage
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Amusement Machines
- General lighting
- Down lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices