SN74LVTH573GQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 2.9 ns |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVTH573GQNR Overview
The 20-VFBGA package contains it. Cut Tape (CT) is the packaging method. It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2.7V~3.6V voltage supply is required for operation. There is -40°C~85°C operating temperature. The 74LVTH series contains FPGAs of this type. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74LVTH573 family, it falls under that category. The device works with a voltage of 3.3V for its supply voltage. With 20 pins, it is equipped. There is a device in this electronic family called LVT. It is designed with 20 pins. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. (Vsup) should be greater than 2.7V. Based on its reliable performance, this device is suitable for TAPE AND REEL. A binary equivalent of the input line is generated by the 3 output lines.
SN74LVTH573GQNR Features
20-VFBGA package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
SN74LVTH573GQNR Applications
There are a lot of Texas Instruments SN74LVTH573GQNR Latches applications.
- Counter control
- Multistage ripple counting
- Automotive ADAS
- Display
- Automotive Body Electronics
- Parallel Input
- Multi-line decoders
- Motor Drives
- Parallel Input
- Parallel-to-Serial Data Conversion