SN74LV373ATPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV373ATPW Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tube is the way it is packaged. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. In the 74LV series, this FPGA is located. An electronic part with 8 bits is designed. This device has 20 terminations. There is no doubt that it belongs to the family 74LV373. The supply voltage of the device is 5V. With 20 pins, it is equipped. This electronic device belongs to the family of LV/LV-A/LVX/H. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. In this device, there are 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 3.3V power supplies. The 16mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. 8 output lines provide binary equivalents of input lines. The element count is 1.
SN74LV373ATPW Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373ATPW Applications
There are a lot of Texas Instruments SN74LV373ATPW Latches applications.
- Flip-flops
- Multistage ripple counting
- Up-Down Johnson
- Communication systems
- Accumulator Registers
- Shift right with parallel loading
- Automotive ADAS
- Serial Output Register
- Lamp and Display (LED)
- Data acquisition