SN74GTLPH1627DGGR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH1627 |
| Pin Count | 64 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 18 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 18 |
| Propagation Delay | 6.2 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 100mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 50mA |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
SN74GTLPH1627DGGR Overview
64-TFSOP (0.240, 6.10mm Width) contains it.Cut Tape (CT) is the way in which it is packaged.Tri-State, Non-Inverted is the output configured for it.Mixed Signal is the translator type of this electrical device.Surface Mount is the method used for mounting this electronic part.In this electrical device, the Channel type is Bidirectional.During operation, the temperature is set to -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.When it comes to terminating a transmission line, there are 64 terminations.A series of related parts can be determined from the base part number 74GTLPH1627.In order for it to operate, it needs to be powered by a voltage of 3.3V.Pin count is 64.There are a number of devices in the series 74GTLPH that belong to it.Level translators has 64 pins.There are 18 bits in this electronic part.The supply voltage is limited to 3.45V.In order for the machine to operate, the supply voltage must be 3.15V.Channels are set to 18.This part is included in Bus Driver/Transceivers.Level translators uses the logic IC REGISTERED BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.This device has the capability of providing reliable performance, so it is suitable for use with TAPE AND REEL.Featuring a 100mA output current, its design flexibility is maximized.The supply voltage should be maintained at 3.3V for high efficiency.
SN74GTLPH1627DGGR Features
64-TFSOP (0.240, 6.10mm Width) package
1 circuits
64 pin count
74GTLPH series
64 pins
SN74GTLPH1627DGGR Applications
There are a lot of Texas Instruments SN74GTLPH1627DGGR voltage translators & level shifters applications.
- Industrial equipment
- SMBus
- Industrial
- Extended Product Life Cycle
- Electronic Points of Sale
- Signaling Level Conversion for Clock or Data
- Available in Military (–55°C/125°C) Temperature Range
- Infotainment Head Unit
- Product Traceability
- Desktop PC