SN74ALS580BDWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS580 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS580BDWE4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. The package is in the form of Tube. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is 0°C~70°C at the operating temperature. This FPGA is part of the 74ALS series. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. 74ALS580 is the family name of it. In order to function, the supply voltage should be set to 5V. The 20 pind are equipped with it. It is part of the family of electronic devices called ALS. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. This part is included in FF/Latches. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. A total of 5V power supplies are required for it to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. It consists of 8 input lines from which an electronic circuit can be built. The output current of 24mA makes it feature maximum design flexibility. Additionally, it is characterized by BROADSIDE VERSION OF 533.
SN74ALS580BDWE4 Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS580 family
20 pin count
20 pins
5V power supplies
SN74ALS580BDWE4 Applications
There are a lot of Texas Instruments SN74ALS580BDWE4 Latches applications.
- Communication systems
- Automatic test equipment
- Sample and hold register
- Digital bus buffer
- Shift right register
- Parallel Input
- Automotive Body Electronics
- Buffer register
- Accumulator Registers
- Motor Drives