SN74AHCT573PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT573PWG4 Overview
In the TSSOP package, it can be found as an embedded module. A Rail/Tube package is used to package it. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage of the device is 5V. 20 pins are available on it. AHCT/VHCT/VT is the family name of this electronic device. It is designed with 20 pins. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. A total of 5V power supplies are required for it to operate. The supply voltage should be maintained at 5V for high efficiency. The superior flexibility of the system is achieved through its use of 8 circuits. 32mA is set as the low level output current. The high level output current is set to -8mA. Operating temperatures should be below 125°C. -40°C is the minimum operating temperature. There is a maximum voltage supply of 5.5V that can be applied to it. With a minimum supply voltage of 4.5V, it operates. A BUS DRIVER logic IC is used. With an output current of 8mA, it is highly flexible in terms of design.
SN74AHCT573PWG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74AHCT573PWG4 Applications
There are a lot of Texas Instruments SN74AHCT573PWG4 Latches applications.
- Counters
- Ring counter
- Automatic test equipment
- Up/down difference counting
- Buffer/Storage Registers
- Multistage ripple counting
- Timers
- OC-48 communication systems
- Up-Down Johnson
- Bus system register with enable parallel lines at bus side