SN74ACT533DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT533DBRE4 Overview
The 20-SSOP (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the way it is packaged. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. An FPGA in this series belongs to the 74ACT family. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. 74ACT533 is its family. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. It is a member of the ACT family of electronic devices. It is designed with 20 pins. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. There are 5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility.
SN74ACT533DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533DBRE4 Applications
There are a lot of Texas Instruments SN74ACT533DBRE4 Latches applications.
- Automotive Cluster
- Parallel data storage
- Parallel-to-Serial Data Conversion
- Flip-flops
- Shift Registers
- Serial Output Register
- Control circuits
- OC-48 communication systems
- Shift left with parallel loading
- Four-bit storage with output enable