SN74AC533NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AC533NSRE4 Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. A 2V~6V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. 74AC is the series number of this FPGA. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74AC533 family. The device works with a voltage of 3.3V for its supply voltage. There are 20 pins on it. It is a member of the AC family of electronic devices. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 6V. 3.3/5V power supplies are needed to operate it. (Vsup) should be greater than 2V. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility.
SN74AC533NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533NSRE4 Applications
There are a lot of Texas Instruments SN74AC533NSRE4 Latches applications.
- PCs and Notebooks
- Lamp and Display (LED)
- Instrumentation
- Shift register
- Data acquisition
- Storage
- Shift right register
- Synchronous frequency dividers
- Watches
- Multi-line decoders