SN74ABT533APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT533APWE4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tube is the way in which it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -40°C~85°C. In the 74ABT series, this FPGA is located. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. The family 74ABT533 includes it. The device is operated when the supply voltage is set to 5V. The device is equipped with 20 pins. There is a device in this electronic family called ABT. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. There is 5V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 30mA.
SN74ABT533APWE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533APWE4 Applications
There are a lot of Texas Instruments SN74ABT533APWE4 Latches applications.
- Avionics
- PCs and Notebooks
- OC-48 communication systems
- High-speed logic
- Multi-line decoders
- Control circuits
- Display driver
- Shift right register
- Parallel Input
- BCD counting