SI9912DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 830mW |
| Technology | MOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9912 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 1mA |
| Power Dissipation | 830mW |
| Output Current | 1A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 30ns 20ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 30V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SI9912DY-T1-E3 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).This configuration includes 2 drivers.There is a mounting bracket in the way of Surface Mount.In the absence of a 4.5V~5.5V supply voltage, its superiority can be demonstrated.N-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.Under its base part number SI9912, various related parts can be found.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 5V.There is a maximum output current of 1A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.Ideally, the high-side voltage should not exceed 30V.Mosfet driver supports an output current of 1A.This device has a maximum power dissipation of 830mW, indicating that it is capable of reducing power loss without overheating.With its power supplies of 5V, it solves the problems of power supply for a variety of applications.As a rule of thumb, the operating supply voltage should be set to 5V.The supply voltage of this device is 1mA and it operates with that voltage.The frequency of 1MHz can improve efficiency.
SI9912DY-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 30V
Maximum power dissipation of 830mW
SI9912DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9912DY-T1-E3 gate drivers applications.
- Multicolor LED/laser displays
- Commercial air-conditioning (CAC)
- Topologies
- Video amplifiers
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- High frequency line drivers
- 3-Phase Motor Inverter Driver
- White Goods - Air Conditioner, Washing Machine,
- RGB applications