SC16C754IA68,512
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC16C754 |
| Pin Count | 68 |
| JESD-30 Code | S-PQCC-J68 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 2.53.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.572mm |
| Length | 24.2316mm |
| Width | 24.2316mm |
| RoHS Status | ROHS3 Compliant |
SC16C754IA68,512 Overview
Alternatively, UART can be purchased in the cost-effective 68-LCC (J-Lead) package.Transmission is carried out over 4, QUART channels.As for packaging, Tube is chosen.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.The configuration uses 68 terminations.In order for it to operate, a voltage of 3.3V must be provided.At present, this electronic part is in the state of Obsolete.As a means of transferring data, there are 4 serial I/Os.The mount can be accessed via the Surface Mount method.In order for it to operate, a voltage of 2.5V 3.3V 5V must be applied.Electronic devices such as this are known as 68-pin integrated circuits.A frequency of 80MHz is measured for this IC.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.A maximum temperature of 85°C is possible for it to operate at.When power supplies are provided of 2.53.3/5V, it is reliable and efficient for electronic designers.Additionally, it is capable of performing ALSO OPERATES AT 2.5V SUPPLY.A base part number of SC16C754 is used for this product.The device can operate at a temperature of -40°C.
SC16C754IA68,512 Features
4 serial I/Os
Clock frequency of 80MHz
Power supplies of 2.53.3/5V
ALSO OPERATES AT 2.5V SUPPLY
SC16C754IA68,512 Applications
There are a lot of NXP USA Inc. SC16C754IA68,512 UARTs applications.
- DTE for Modem Communication Systems
- Multi-port RS-232/RS-422/RS-485 Cards
- Gaming Terminals
- Communications equipment
- Cellular data devices
- Universal PCI Bus Add-in Card
- Ethernet Network to Serial Ports
- Telecommunication Network Routers
- Factory Automation
- Portable and battery operated devices