NCP5603MNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 580mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP5603 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.85V |
| Nominal Supply Current | 800mA |
| Power Dissipation | 580mW |
| Max Supply Current | 800mA |
| Voltage - Output | 4.75V~5.25V |
| Topology | Switched Capacitor (Charge Pump) |
| Halogen Free | Halogen Free |
| Output Current per Channel | 200mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP5603MNR2G Overview
There is also a 10-VFDFN Exposed Pad package that is used to save space on the board. There are 1 outputs used for the design of this LED drivers.In this case, mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.Backlight has many advantages.It operates with terminations of 10.It has a base of 10 pins.Undetermined failures can occur if the voltage supply is below 2.7V.We estimate that there are 4 segments.I have mounted it by Surface Mount.It is under the base part number NCP5603 that the LED driver can be found.The supply voltage of 5.5V is an acceptable maximum value.Its output voltage is 4.75V~5.25V.This device contains 10 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimum supply voltage of 2.85V is required to meet the highest efficiency standards.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 800mA.
NCP5603MNR2G Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
NCP5603MNR2G Applications
There are a lot of ON Semiconductor NCP5603MNR2G LED Driver ICs applications.
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Constant Voltage Power Source for portable equipment
- Down lighting
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
- LED headlights
- Other Electronic Devices
- LED Lighting PFCs, Linear Dimmable