MIC3223YTSE
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Lighting, Signage |
| Frequency | 1MHz |
| Base Part Number | MIC3223 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 18V |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 4.5V |
| Output Current | 350mA |
| Max Supply Current | 2A |
| Voltage - Output | 37V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 20V |
| Output Current per Channel | 3.5A |
| Current - Output / Channel | 3.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 20V |
| Voltage - Supply (Min) | 4.5V |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC3223YTSE Overview
It saves board space with the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. Typically, LED drivers have 1 outputs.Surface Mount is used to mount the led driver.As a DC DC Regulator, it has high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.Lighting, Signage has considerable advantages.The frequency of 1MHz is used as the basis for its operation.A configuration of this chip is made up of 16 pins.There may be undetermined failures if the voltage supply falls below 4.5V.There is a device mounted on the Surface Mount.The LED driver is based on part number MIC3223.The voltage of 20V is acceptable.This device produces a voltage of 37V volts.An optimal value of supply voltage is 20V.This device requires a minimum voltage of 4.5V volts.The system operates at a minimum supply voltage of 4.5V in order to achieve maximum efficiency.In the presence of a maximum supply current, the value of 20V will be reached.In order to maintain maximum efficiency, the supply current cannot exceed 2A.For stable operation, the operating temperature should not exceed 125°C.A load can be supplied with 350mA current.The operating temperature should be higher than -40°C so as to realize stable operation.Powering systems requires 18V voltages.It is capable of fulfilling its full functionality when the switching frequency remains at 1MHz.
MIC3223YTSE Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Operating with the supply voltage of 18V
Switching frequency of 1MHz
MIC3223YTSE Applications
There are a lot of Microchip Technology MIC3223YTSE LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Sports Facility Lighting
- White LED Backlight for portable equipment
- Down lights
- Architectural lighting
- Museum lighting
- Other Electronic Devices
- Portable lighting
- Replacement lamps
- Medical surgery lighting