MAX823TEXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 247mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX823TEXK+T Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. This power management has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 4μA supply current present in the power management. It is always advisable to use MAX823, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3.3V power to power this power management.
MAX823TEXK+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4μA operating supply current
MAX823TEXK+T Applications
There are a lot of Maxim Integrated MAX823TEXK+T Voltage Supervisors applications.
- Computer applications
- Microprocessor system
- Power distribution systems of CCU
- Power distribution systems of infant care room
- Telecommunications equipment
- Battery-powered equipment
- Power distribution systems of ICU
- WiFi router
- Kitchen appliances
- Utility meter