MAX308MJE
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 500μA |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 600 ns |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
MAX308MJE Overview
The packaging of this product consists of Tube.In order to maximize cost efficiency, it is embedded in the CDIP package.The device operates at a voltage of 15V.In this case, the supply voltage is nominally negative and referred to as -15V.A 16 termination is used to prevent signals from reflecting off the end of the transmission line.This is a type of 16-pin electronic component with a high reputation for quality and performance.In the subcategory of Multiplexer or Switches, it can be found as an electronic device.It is recommended that the device operate at a temperature of 125°C.Electronic devices should be operated at a minimum temperature of -55°C.Depending on the component with the lowest tolerance for high temperatures, 240 will determine the reflow temperature limit.The operating voltage of 500μA is ideal for this device.A voltage higher than 5V should be used for the dual supply.It is recommended that the dual supply voltage be lower than 20V.SINGLE-ENDED MULTIPLEXER works as its analog IC type.This device can operate on a voltage of 28V.At 30V, the maximum supply voltage is limited.During normal operation, the minimum supply voltage is kept at 5V.It is configured with 1 channels.There are 16 pins on the device.
MAX308MJE Features
Supplied in the CDIP package
Operating supply current of 500μA
Operating supply voltage of 28V
MAX308MJE Applications
There are a lot of Maxim Integrated MAX308MJE Analog Multipliers & Dividers applications.
- Strain gauges
- Portable media players
- Active probe
- Multimedia playback equipment
- Test and measurement instruments
- Logarithmic and exponential operation circuits
- Information processing
- Large motor controllers
- Proportional operation circuits
- Addition and subtraction operation circuits