MAX16834ATP+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.051W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | MAX16834 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 2.051W |
| Output Current | 1.5A |
| Max Supply Current | 10mA |
| Voltage - Output | 27V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.75V |
| Max Input Voltage | 28V |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 100 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX16834ATP+ Overview
In order to save board space, the 20-WFQFN Exposed Pad package is used. LED drivers design with 1 outputs.Surface Mount is used to mount the led light driver.In this case, it emerges as a DC DC Controller with a high efficiency.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.Automotive, Backlight has many advantages.This system operates at 100kHz~1MHz frequency.20 terminations are used in its operation.This module has 20 pins as its base.Based on our estimates, there are 100 segments.The mount is in the direction of Surface Mount.You can find this LED driver under the base part number MAX16834.28V is a maximum acceptable voltage for the supply.In this device, the output voltage is 27V volts.On this device, there are 20 pins.Further, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 4.75V is required for it to operate.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 4.75V.The allowable maximum value of supply current reaches 28V.This device is able to provide high efficiency when the maximal supply current should be less than 10mA.You can supply 1.5A current to the load.Electronic components can function properly when their switching frequency is set to 1MHz.
MAX16834ATP+ Features
Available in the 20-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Switching frequency of 1MHz
MAX16834ATP+ Applications
There are a lot of Maxim Integrated MAX16834ATP+ LED Driver ICs applications.
- Replacement lamps
- High-end retail lighting
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Panel lighting
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Portable lighting
- Street lighting