LTC4301IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Matte Tin (Sn) |
| Applications | I2C - Hotswap |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4301 |
| Output | 2-Wire Bus |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Current - Supply | 4.5mA |
| Input | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Capacitance - Input | 10pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4301IMS8#PBF Overview
To make transportation easier, the power buffer is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Power buffer ready in Tube packages.Surface Mount Universal mout allows easy adaptation.Typical Buffer, ReDriver type.As a result, the op amp buffer is powered by 2.7V~5.5V voltage.In order for the output quality to be maintained, 2 channels must work together.The system facilitates the input of 2-Wire Bus.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.It targets applications such as I2C - Hotswap and others.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "LTC4301".A 8 terminal can be found on the op amp buffer.During reflow, the peak temperature of the material is determined by the number 260.This splitter can accomplish a great deal of demanding work when supplied with 3.3V voltage.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.Output is expressed in 2-Wire Bus.The 8 pins are on it.Basically, it's a 4.5mA op amp buffer.It is mounted on PCBs or other boards using a Surface Mount.If you feed the repeter with a voltage higher than 5.5V, you are not supposed to use the repeter.
LTC4301IMS8#PBF Features
2 channels.
Mainly used in I2C - Hotswap.
LTC4301IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4301IMS8#PBF Signal Buffers, Repeaters, Splitters applications.
- SATA SSDs or HDDs
- Industrial/Embedded PC
- Servers
- Desktop Computers
- Cellular Phone Base Stations
- Storage Area Networks
- Protection Switching
- PECL-to-LVDS Translation
- Communications Switchers
- Digital Cross-Connects