LM211QDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211QDRG4 Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type for this comparator.This device is designed in Tape & Reel (TR) case.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .In total, it contains 1 elements.Electronic comparator has 8 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.8 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM211 .This comparator presents a quiescent current of 6mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 6mA .If the current supply exceeds 6mA , the comparator might be damaged.The maximal current your can input into the device is 100nA .Based on the voltage formula, the voltage gain of the part is 106.02dB .For normal operation, there should be 28V operating supply voltage applied.Often found in ADC circuits, this device is packed in TR .
LM211QDRG4 Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211QDRG4 Applications
There are a lot of Texas Instruments LM211QDRG4 linear comparators applications.
- Hand-Held Electronics
- Limit Comparators
- Metering Systems
- Consumer Medical Electronics
- Notebooks and PDAs
- Power management
- Motor drives
- Wireless Base Stations
- Portable Battery Monitoring
- Portable and Battery-Powered Systems