LC5256MV-5F256I
| Parameters | |
|---|---|
| Nominal Supply Current | 26mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 6 ns |
| Number of Gates | 75000 |
| Max Frequency | 300MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 26mA |
| Number of I/O | 141 |
LC5256MV-5F256I Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 256-BGA package contains the item.It is programmed with 141 I/Os.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of BOTTOM.There is 3.3V voltage supply for this device.This part is in the family [0].It is packaged in the way of Tray.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispXPLD? 5000MVseries contain this type of chip.It is programmed with 256 pins.This device can also display [0].You can find its related parts in the [0].It is possible to construct digital circuits using 75000gates, which are devices that serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.It operates with the maximal supply voltage of 3.6V.The device is designed to operate with a minimal supply voltage of 3VV.8logic blocks/elements are present.Programmable I/Os are counted up 100.It is recommended that the maximal frequency be lower than 300MHz.
LC5256MV-5F256I Features
256-BGA package
141 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC5256MV-5F256I Applications
There are a lot of Lattice Semiconductor Corporation LC5256MV-5F256I CPLDs applications.
- Multiple Clock Source Selection
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- Programmable power management
- ON-CHIP OSCILLATOR CIRCUIT
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Boolean function generators
- White goods (Washing, Cold, Aircon ,...)
- Custom shift registers
- Address decoders