LA6588MC-AH
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -30°C~90°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e6 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Additional Feature | SEATED HGT-NOM |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 8V~26.4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LA6588 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 28V |
| Supply Voltage-Max (Vsup) | 26.4V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Logic |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 9.5mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 800mW |
| Output Current | 800mA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 800mA |
| Collector Emitter Voltage (VCEO) | 26V |
| Max Collector Current | 800mA |
| Voltage - Load | 8V~26.4V |
| Fault Protection | Over Temperature, Short Circuit |
| Motor Type | Brushless DC (BLDC) |
| Load Type | Inductive |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LA6588MC-AH Overview
For packaging, it is used with Tape & Reel (TR).Cost savings are achieved by including H bridge in the 10-LSOP (0.173, 4.40mm Width) package.The supply voltage of 8V~26.4V can improve reliabilbridge drivery.Surface Mount is mounted on H bridge circuit.In order for -30°C~90°C TA to function normally, motor driver H bridge needs to be kept at a certain temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.The board is mounted using Surface Mount.Among full bridges specific characteristics is Auto Restart.A transmission line can be terminated at a 10 termination with the H bridge whose characteristic impedance matches the transmission line.An interface using 10 pins is used to provide pronged contact.In addition to the LA6588 H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.With a supply voltage of 24V, H bridge circuit operates.H bridge circuit has been incorporated with BRUSHLESS DC MOTOR CONTROLLER as its analog IC type.The output pins and the power supply pins are conducting 800mA current.It is made up of two 10 pins that work together to perform the specific functions of this bridge driver.There is a 1 output on it.This H bridge motor driver belongs to the subcategory of Motion Control Electronics and shares several similarities with other parts in that category.The voltage released by the Hbridge is 28V.Electricity is supplied to the electrical load by 24V.Also, H-bridge is capable of providing SEATED HGT-NOM.
LA6588MC-AH Features
Available in 10-LSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LA6588
With SEATED HGT-NOM Drivers
LA6588MC-AH Applications
There are a lot of ON Semiconductor LA6588MC-AH Full Bridge Drivers, Half-Bridge Drivers applications.
- OA equipments
- Non-V-Core
- VTR
- High-Performance Gaming Motherboards
- Desktop Computers
- Industrial Pumps
- Compact Blade Servers
- Bipolar stepper motor
- Quad DC motor
- DVD players