IR21571SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Ballast Controller |
| Max Power Dissipation | 1W |
| Voltage - Supply | 10.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 45.5kHz~50.5kHz |
| Base Part Number | IR21571SPBF |
| Output Voltage | 25V |
| Max Output Current | 250mA |
| Operating Supply Voltage | 15.6V |
| Input Voltage-Nom | 14V |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 10mA |
| Output Current | 500mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 25V |
| Rise Time | 150ns |
| Fall Time (Typ) | 100 ns |
| Min Output Voltage | 10V |
| Switcher Configuration | PUSH-PULL |
| Number of Drivers | 2 |
| Dimming | No |
| Height | 1.5mm |
| Length | 9.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR21571SPBF Overview
Materials in compliance with Tube's specifications.Electronics manufacturers recogni16-SOIC (0.154, 3.90mm Width)e the 16-SOIC (0.154, 3.90mm Width)'s low package cost.Surface Mount mounts it on the PCB.As a standard grade, it's referred to as Type Ballast Controller.The device is powered by a voltage to ensure normal operation.The -40°C~125°C setting should always be used.However, accuracy can still be maintained at 45.5kHz~50.5kHz frequency.In the device, the best part has a number of IR21571SPBFs.There are 16 terminations on it.Devices run on 1 functions.The supply current of the device is set to 5.5mA.There is no change to the pin number of the component.Surface Mount-direction mounting is done.It is set to 500mA in this case.It operates with 15.6V voltage.It is possible to control this device using 25V's output.The maximum supply temperature it can handle is 10mA.You can use up to 2 eligible receivers/drivers at once on the field.Generally, it works at maximum 250mA output current.
IR21571SPBF Features
Mounting type of Surface Mount
Operating supply voltage of 15.6V
IR21571SPBF Applications
There are a lot of Infineon Technologies IR21571SPBF Lighting Controllers applications.
- Smoothing
- Frequency converters
- Decoupling or bypassing
- Noise filtering
- To reduce power noise & signal noise
- Motor start
- DC/DC, DC/AC, and AC/AC converters
- Power factor correction (PFC)
- Computer motherboards
- DC link