INA285AQDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | INA285 |
| Function | Current Monitor |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -14V~80V |
| Accuracy | ±0.4% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 140 dB |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 2 kHz |
| Sensing Method | High/Low-Side |
| Input Bias Current | 25μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 1000 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA285AQDRQ1 Overview
In package Tape & Reel (TR), buck boost converter is included.In this case, voltage regulator has been packaged in the same way as 8-SOIC (0.154, 3.90mm Width).This electronic part is mounted in the way of Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -14V~80V as an input voltage.Current regulator belongs to the family INA285.In a computer or other communication constant current regulator, 8 pins are pronged contacts that provide a signal interface.It is mounted by Surface Mount on this current regulator.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.The current regulations of this part are included in a part that is named Operational Amplifier.In order for it to operate, 2.7V has to be the minimum supply voltage.There are FPGAs of this type in the Automotive, AEC-Q100 series.An amplifying buck boost converter such as this one is a OPERATIONAL AMPLIFIER type amplifying buck boost converter.
INA285AQDRQ1 Features
Tape & Reel (TR) package
INA285 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
INA285AQDRQ1 Applications
There are a lot of Texas Instruments INA285AQDRQ1 Current Regulation/Managements applications.
- Suspension controls
- Battery management
- Engine management
- Motor controls
- Industrial applications current measurement
- Transmission controls
- Over current monitor
- Automotive current measurement
- Battery chargers
- Over-current protection