INA198AIDBVRG4
| Parameters | |
|---|---|
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 900μA |
| Accuracy | 1 % |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 16μA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 200 kHz |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Weight | 17.491656mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 5 |
| Number of Elements | 2 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
INA198AIDBVRG4 Overview
There is an inclusion of buck boost converter in the package Tape and Reel.In the way voltage regulator is packaged, voltage regulator is in the form of a SOT-23-5.An example of this is the 5 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Several pronged contacts are used in computer interfaces as 5 pins.Using Surface Mount as a mounting system, this current regulator is mounted.The number of channels is growing strong/weak: 1.A maximum supply voltage of 18V can be supported by it.This part is included in Operational Amplifier.It operates with the minimal supply voltage of 2.7V.An amplifier of this type is OPERATIONAL AMPLIFIER.2 elements make up this graph.Current regulations have 40dB voltage gains, which are simple ratios between the output voltage and the input voltage.To ensure its reliability, the boost controller operates at its maximum operating temperature, 125°C.In order to operate the boost controller, it should be kept at a temperature greater than -55°C.
INA198AIDBVRG4 Features
Tape and Reel package
The maximal supply voltage of 18V
2 elements
The maximal operating temperature of 125°C to ensure its reliability.
INA198AIDBVRG4 Applications
There are a lot of Texas Instruments INA198AIDBVRG4 Current Regulation/Managements applications.
- Battery chargers
- Smart battery packs
- Automotive current measurement
- Suspension controls
- Battery management
- Level translating
- DC-to-dc converters
- Current sensing
- DC motor control
- Over-current protection