FCT162373CTPVCTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FCT162373CTPVCTG4 Overview
The 48-BSSOP (0.295, 7.50mm Width) package contains it. A Tape & Reel (TR) package is used to package it. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. An FPGA in this series belongs to the 74FCT family. 8 Bits are used in the design of this electronic part. This device has 48 terminations. As a member of the 74FCT162373 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. The 48 pind are equipped with it. It is a member of the FCT family of electronic devices. Designed with 48 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. There are 5V power supplies required for this machine to operate. (Vsup) should be greater than 4.5V. Input Lines consist of electronic circuits, and there are 16. Based on its reliable performance, this device is well suited to TAPE AND REEL. There are no external factors that affect it, so it consumes 5μA quiescent current.
FCT162373CTPVCTG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
FCT162373CTPVCTG4 Applications
There are a lot of Texas Instruments FCT162373CTPVCTG4 Latches applications.
- Frequency
- Automotive ADAS
- Display driver
- Lamp and Display (LED)
- Programmable binary
- Automotive Infotainment
- Clocks
- Ring counter
- Counter
- Bus system register with enable parallel lines at bus side