FAN5702UC08X
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFBGA, WLCSP |
| Number of Pins | 16 |
| Weight | 47mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.31.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Current Rating | 8mA |
| Frequency | 1.2MHz |
| Base Part Number | FAN5702 |
| Number of Outputs | 6 |
| Output Voltage | 4V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 180mA |
| Max Supply Current | 4.4mA |
| Max Output Voltage | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 180mA |
| fmax-Min | 0.4 MHz |
| Dimming | I2C, PWM |
| Number of Segments | 6 |
| Multiplexed Display Capability | NO |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN5702UC08X Overview
It saves board space with the 16-UFBGA, WLCSP package. 6 outputs are designed into LED drivers.In this case, mounting method is Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.The frequency of 1.2MHz is used as the basis for its operation.It operates using 16 terminations.The LED light driver has a base configuration of 16 pins.The number of segments is 6.This is mounted by Surface Mount.It is under the base part number FAN5702 that the LED driver can be found.5.5V is a maximum acceptable voltage for the supply.As a result of its characteristics, it is also classified as Display Drivers.Initially, it accepts a voltage of 2.7V.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.The maximum supply current is 5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 4.4mA.In this case, the load can only be supplied with 180mA current.This device has a voltage output of 4V volts.The output voltage should not be in excess of 5V.
FAN5702UC08X Features
Available in the 16-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V
FAN5702UC08X Applications
There are a lot of ON Semiconductor FAN5702UC08X LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- Amusement Machines
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- White LED Backlight for portable equipment
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage