EPM7128STC100-10N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7128 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Number of Gates | 2500 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Max Junction Temperature (Tj) | 90°C |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Ambient Temperature Range High | 70°C |
| Number of Logic Elements/Blocks | 8 |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM7128STC100-10N Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 100-TQFP package.It is equipped with 84I/O ports.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 5V.It is included in Programmable Logic Devices.Trayis the packaging method.A reliable operation is ensured by the operating temperature of [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the MAX? 7000S series.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.In accordance with the [0], its related parts are listed.There are 2500 gates, which are devices that acts as a building block for digital circuits. EEPROM is adopted for storing data.A maximum supply voltage of 5.25Vis used in its operation.Initially, it requires a voltage of 3Vas the minimum supply voltage.8logic elements/blocks exist.The system runs on a power supply of 3.3/55V watts.It is possible to achieve a frequency of 125MHz.
EPM7128STC100-10N Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128STC100-10N Applications
There are a lot of Intel EPM7128STC100-10N CPLDs applications.
- Programmable power management
- I/O PORTS (MCU MODULE)
- DDC INTERFACE
- Voltage level translation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Digital multiplexers
- Field programmable gate
- I2C BUS INTERFACE
- D/T registers and latches
- Interface bridging