EPM5128GM
| Parameters | |
|---|---|
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 68 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | LABS INTERCONNECTED BY PIA; 8 LABS; 128 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 68 |
| JESD-30 Code | S-CPGA-P68 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of I/O | 52 |
| Clock Frequency | 33.3MHz |
| Propagation Delay | 55 ns |
| Organization | 7 DEDICATED INPUTS, 52 I/O |
| Programmable Logic Type | UV PLD |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 7 |
| In-System Programmable | NO |
| Height Seated (Max) | 4.96mm |
| Length | 27.94mm |
| Width | 27.94mm |
| RoHS Status | Non-RoHS Compliant |
EPM5128GM Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).This device has 52 I/O ports programmed into it.There are 68 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.This part is in the family [0].A chip with 68pins is programmed.When using this device, LABS INTERCONNECTED BY PIA; 8 LABS; 128 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCKis also available.It runs on a voltage of 5Vvolts.A total of 7dedicated inputs are available for detecting the status of input signals.Its clock frequency should not exceed 33.3MHz.A programmable logic type is categorized as UV PLD.It is recommended that the operating temperature be kept below 125°C.At a minimum, the operating temperature should be [0].
EPM5128GM Features
52 I/Os
68 pin count
5V power supplies
EPM5128GM Applications
There are a lot of Altera EPM5128GM CPLDs applications.
- Custom state machines
- I/O PORTS (MCU MODULE)
- Portable digital devices
- DDC INTERFACE
- Dedicated input registers
- Power automation
- State machine control
- ToR/Aggregation/Core Switch and Router
- Power up sequencing
- Multiple DIP Switch Replacement