DRV8803DWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DRV8803 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 60V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Low Side (4) |
| Current - Output | 800mA |
| Supply Current-Max (Isup) | 2.1mA |
| Voltage - Load | 8.2V~60V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8803DWR Overview
The package contains [0].This part is packed in a 20-SOIC (0.295, 7.50mm Width) case.Ideally, the part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.There is a capability for the device to provide 8.2V~60V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. Drivers controllers is possible to classify the motor type as Brushed DC.In this part, there are 20 terminations available.A voltage of 8.2V~60Vcan be applied to the load.The amplifier should be set to 24V.Its recommended mounting way is Surface Mount.The output current should remain at 800mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.Drivers controllers is based on the DRV8803 part number.20pins are used in its design.The available outputs are [0].
DRV8803DWR Features
Applications : General Purpose
Load voltage across the chip 8.2V~60V
base on DRV8803 number
designed with 4 outputs
DRV8803DWR Applications
There are a lot of Texas Instruments DRV8803DWR motor drivers applications.
- Dome
- Camera-enabled smartphones
- CHMSL (center high-mount stop lamps)
- Handheld devices
- Hidden coves in high-end residential settings
- Arena lighting
- Hospitality buildings
- LED ballasts
- Daytime running lights (DRLs)
- Industrial high-bay lights