CY74FCT2573ATQCTG4
| Parameters | |
|---|---|
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Current - Output | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 12mA |
| Number of Input Lines | 8 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 125.786834mg |
CY74FCT2573ATQCTG4 Overview
It is embedded in the SSOP package. This package has the format of Tape and Reel. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. It is part of the family of electronic devices called FCT. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are required for it to operate. Input Lines consist of electronic circuits, and there are 8. A high level of efficiency is achieved by maintaining the supply voltage at 5V. As far as external factors are concerned, it consumes 100μA of quiescent current without getting affected by them. 1 elements are present in it. There is 12mA low level output current set. There is -15mA output current at the high level. Ideally, the temperature should not be higher than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The supply voltage is limited to 5.25V. The minimal voltage for operation is 4.75V. There is a logic IC BUS DRIVER used in the system. The output current of 12mA makes it feature maximum design flexibility.
CY74FCT2573ATQCTG4 Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT2573ATQCTG4 Applications
There are a lot of Texas Instruments CY74FCT2573ATQCTG4 Latches applications.
- General-Purpose Register
- Avionics
- Relay replacement
- Multi-line decoders
- Instrumentation
- Ring counter
- Automotive Infotainment
- Parallel Output
- Automotive Body Electronics
- PCs and Notebooks