CD74ACT373M96E4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT373M96E4 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A Tape & Reel (TR) package is used to package it. It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. During operation, the temperature is set at -55°C~125°C. The 74ACT series contains FPGAs of this type. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ACT373 is the family name of it. A 5V voltage supply is required for operation. The device is equipped with 20 pins. There is a device in this electronic family called ACT. There are 20 pins on it. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. 5V power supplies are needed to operate it. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is well suited to TR. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. The quiescent current consumed by it is 8μA because it is unaffected by external factors.
CD74ACT373M96E4 Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
CD74ACT373M96E4 Applications
There are a lot of Texas Instruments CD74ACT373M96E4 Latches applications.
- Shift Registers
- High-speed logic
- Buffer Storage
- Pattern generators
- TV Set-top Boxes
- Storage
- A/D and D/A conversion
- Automotive Cluster
- Counter timers
- Address register