CD40175BME4
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 14MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 400 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 70 ns |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 6.8mA |
| fmax-Min | 6.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
CD40175BME4 Overview
The flip flop is packaged in a case of SOIC. The list contains 1 elements. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used as the power supply for this D latch. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. On the basis of its reliable performance, this D flip flop is well suited for use with TUBE. This D latch consumes 20μA quiescent current at all. A -4.2mAis set for the high level output current. Low level output current is set to 6.8mA. A temperature below 125°Cshould be used for operation. The operating temperature should be higher than -55°C. Normally, it operates with a voltage of 3VV as its minimum supply voltage. The maximum supply voltage supported by the flip flop is 18V. It is possible to achieve a frequency of 14MHz. D FLIP-FLOPis the logic IC it uses. There are 1 functions associated with the JK flip flop. 16pins are available on this JK flip flop.
CD40175BME4 Features
16 pins
1 Functions
16 pin count
CD40175BME4 Applications
There are a lot of Texas Instruments CD40175BME4 Flip Flops applications.
- Memory
- Data Synchronizers
- CMOS Process
- Pattern generators
- Registers
- Differential Individual
- Circuit Design
- Clock pulse
- Computers
- Asynchronous counter